ငွေပေးချေမှုရမည့်အမျိုးအစား: | T/T,Paypal,Money Gram,Western Union |
---|---|
မင်: | FOB,CIF |
min ။ အမိန့်: | 1 Set/Sets |
မော်ဒယ်နံပါတ်။: HLG-150H
အမှတ်တံဆိပ်: ဆိုလို
ထုပ်ပိုး: သတျတော
ထွက်နိုင်ရေး: 20000pcs per month
သယ်ယူပို့ဆောင်ရေး: Ocean,Land,Air
မူလအစရာ: ဂွမ်ဒေါင်း, တရုတ်
Supply နိုင်ခြင်း: 5000pcs per month
ဆိပ်ကမ်း: Shenzhen,Guangzhou,Hongkong
ငွေပေးချေမှုရမည့်အမျိုးအစား: T/T,Paypal,Money Gram,Western Union
မင်: FOB,CIF
HLG-150h Mondel Waterproof Led Power Supply
ထုတ်ကုန်များဖော်ပြချက်
ရေစိုခံ 150w တစ် sight output ကို switching power supply , အောက်ပါပုံစံသည် INSEELE 's LED မီးခွက်များ , HLG -150 နာရီ, 120 H -15 , HLG - 150 H -24, HLG -150 H -24, HLG-150 H -24 တို့အတွက်အခြားမော်ဒယ်လ်များစသည်တို့ကိုစသည်တို့သည်ကွဲပြားခြားနားသော input input lamps အတွက်ဖြစ်သည်။
HLG-150 H -12 ကွက်လပ်: IP67 အဆင့်သတ်မှတ်ချက်။ i / o ဆက်သွယ်မှုအတွက် cable ကို။
HLG-150 H -12A: IP65 အဆင့်သတ်မှတ်ချက်။ output voltage နှင့်စဉ်ဆက်မပြတ်လက်ရှိအဆင့်ကိုပြည်တွင်း potentiometer မှတဆင့်ချိန်ညှိနိုင်သည်။
HLG-150 H -12B: IP67 အဆင့်သတ်မှတ်ချက်။ 1 ~ 10vdc သို့မဟုတ် pwm signal ကိုသို့မဟုတ်ခုခံနှင့်အတူ output cable ကိုမှတဆင့်စဉ်ဆက်မပြတ်လက်ရှိအဆင့်ချိန်ညှိ။
HLG-150 H -12D (option): IP67 အဆင့်သတ်မှတ်ချက်။ Timer Dimming Function, Contact အသေးစိတ်အတွက်ကောင်းစွာဆိုလို။
Model |
HLG-150H-12 |
HLG-150H-15 |
HLG-150H-24 |
|
Output |
DC VOLTAGE |
12V |
15V |
24V |
CURRENT ADJ. RANGE |
Can be adjusted by internal potentiometer A type only |
|||
7.5-12.5A |
6-10A |
3.8-6.3A |
||
RATED POWER |
150W |
150W |
151.2W |
|
VOLTAGE ADJ. RANGE |
10.8-13.5V |
13.5-17V |
22-27V |
|
Input |
Voltage Range |
90-264VAC 127-370V DC |
||
Frequency Range |
47-63Hz |
|||
POWER FACTOR |
PF>0.98/115VAC, PF>0.95/230VAC, at full load (Please refer to "Power Factor Characteristic" curve) |
|||
Efficiency(Typ.)(230Vac) |
92% |
92.5% |
93.5% |
|
AC CURRENT (Typ.) |
1.7A / 115VAC 0.75A / 230VAC |
|||
INRUSH CURRENT(Typ.) |
COLD START 75A/230VAC |
|||
LEAKAGE CURRENT |
<0.75mA / 240VAC |
|||
PROTECTION |
OVER LOAD |
95~ 108% |
||
Protection type : Constant current limiting, recovers automatically after fault condition is removed |
||||
SHORT CIRCUIT |
Constant current limiting, recovers automatically after fault condition is removed |
|||
OVER VOLTAGE |
14-17V |
18-21V |
28-34V |
|
Protection type :Shut down O/P voltage, re-power on to recover |
||||
OVER TEMPERATURE |
100 ℃ up or less10 ℃ (RTH2) |
|||
Protection type : Shut down and latch off o/p voltage, recovers automatically after temperature goes down |
||||
Environment |
WORKING TEMP. |
-40 ~ +70 ℃(Refer to output load derating curve) |
||
WORKING HUMIDITY |
20 ~ 95% RH non-condensing |
|||
SAFETY |
SAFETY STANDARDS |
UL8750, CSA C22.2 No. 250.0-08, EN61347-1, EN61347-2-13 independent IP65 or IP67, J61347-1, J61347-2-13 approved ; design refer to UL60950-1, TUV EN60950-1 |
||
WITHSTAND VOLTAGE |
I/P-O/P:3.75KVAC I/P-FG:2KVAC O/P-FG:0.5KVAC |
|||
ISOLATION RESISTANCE |
I/P-O/P, I/P-FG, O/P-FG:100M Ohms/500VDC / 25 / 70% RH |
|||
EMC EMISSION |
Compliance to EN55015, EN55022 (CISPR22) Class B, EN61000-3-2 Class C ( 50% load) ; EN61000-3-3 |
|||
EMC IMMUNITY |
Compliance to EN61000-4-2,3,4,5,6,8,11, EN61547, EN55024, light industry level (surge 4KV), criteria A |
|||
Others |
MTBF |
192.2K hrs min. MIL-HDBK-217F (25℃ ) |
||
DIMENSION |
228*68*38.8mm (L*W*H) |
|||
PACKING |
1.15Kg; 12pcs/14.8Kg/0.8CUFT |
|||
Note |
1. All parameters NOT specially mentioned are measured at 230VAC input, rated load and 25 of ambient temperature. 2. Ripple & noise are measured at 20MHz of bandwidth by using a 12" twisted pair-wire terminated with a 0.1uf & 47uf parallel capacitor. 3. Tolerance : includes set up tolerance, line regulation and load regulation. 4. Derating may be needed under low input voltages. Please check the static characteristics for more details. 5. Type A only. 6. Safety and EMC design refer to EN60598-1, CNS15233, GB7000.1, FCC part18. 7. Length of set up time is measured at cold first start. Turning ON/OFF the power supply may lead to increase of the set up time. 8. The power supply is considered as a component that will be operated in combination with final equipment. Since EMC performance will be affected by the complete installation, the final equipment manufacturers must re-qualify EMC Directive on the complete installation again. 9. Refer to warranty statement. |
1. အထူးဖော်ပြခြင်းမရှိသော parameters များကို 230vac input တွင် 230vac input နှင့်ပတ်ဝန်းကျင်အပူချိန် 25 တွင်တိုင်းတာသည်။ မှတ်ချက်
2 ။
3. သည်းခံစိတ် - သည်းခံခြင်း, မျဉ်းစည်းကမ်းထိန်းသိမ်းရေးနှင့်ဝန်ထုပ်ဝန်ပိုးများကိုတပ်ဆင်ခြင်းပါဝင်သည်။
4. အနိမ့် input ကို voltages အောက်မှာ derating လိုအပ်နိုင်ပါသည်။ အသေးစိတ်အတွက် static ဝိသေသလက္ခဏာများကိုစစ်ဆေးပါ။
5. တစ်ခုတည်းရိုက်ပါ။
6 ။
7. set up အချိန်ကြာချိန်ကိုအအေးမိပထမ ဦး ဆုံးအစတွင်တိုင်းတာသည်။ လျှပ်စစ်ဓာတ်အားထောက်ပံ့မှုကိုဖွင့် / ပိတ်ခြင်းသည် set up အချိန်ကိုတိုးစေသည်။
8 ။ EMC စွမ်းဆောင်ရည်ကိုထိခိုက်လိမ့်မည်ကတည်းက ဖြည့်စွက်တပ်ဆင်ခြင်း, နောက်ဆုံးပစ္စည်းကိရိယာထုတ်လုပ်သူများက EMC ညွှန်ကြားချက်ကိုအပြည့်အ 0 တပ်ဆင်ခြင်းတွင်ထပ်မံအရည်အချင်းပြည့်မီရမည်။
9. အာမခံကြေညာချက်ကိုကြည့်ပါ။ကုန်ပစ္စည်းကဏ္ဍ : LED ဆက်စပ်ပစ္စည်းများ > Merowell WaterProof Power Supply
မိုဘိုင်းဝက်ဘ်ဆိုက် အညွှန်းကိန်း. မြေပုံအညွှန်း
ကျွန်ုပ်တို့၏သတင်းလွှာရန် Subscribe:
အထူးမွမ်းမံမှုများ, လျှော့စျေးရယူပါ
ကမ်းလှမ်းချက်များနှင့် Big ဆု!